FEATURES
-Deterrent Surveillance
-Integral Multi-Protocol (Coaxitron®, RS-422 D and P) Receiver/Driver
-Digital Position and Zoom Control and Feedback Via D Protocol
-Integral Camera Enclosure
-Variable Speed 0.1-100°/Second
-360° Continuous Pan Rotation
-Quick and Easy Installation
-+33° to -83° Tilt Range
-Operational in 90 mph Winds, Can Withstand Wind Velocity Up to 130 mph
-Pan Preset Speed of 100° Per Second in 50 mph Winds and 50° Per Second in 90 mph Winds
-Meets NEMA Type 4X and IP66 Standards – Pan/Tilt and Enclosure
-Variable Scan Speeds (1-40°/Second)
-Translator Boards for Selected Competitive Protocols
-Easy to Install – Quick and Simple Electrical Connections
-24 VAC or 120/230 VAC Selectable
-Designed for Minimal Maintenance, No Gears to Adjust
-Full Continuous-Duty Warranty

?SOFTWARE/HARDWARE
-64 Progammable Presets with Labels
-Auto, Frame, and Random Scan
-Programmable Power-up Mode
-Programmable Park
-Programmable Manual Limit Stops (Pan)
-Programmable Scan Limit Stops (Pan)
-Patterns
-Proportional Pan/Tilt
-Eight Zones (programmable in size) Can Be Labeled with Up to 20 Characters Each
-Up to Eight Zones (programmable in size) Can Be Set to Output Blank Video
-10-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
-Sun Shroud, Heater/Window Defroster, and Insulation All Standard
-One Auxiliary Output
-Integrated Window Wiper with Programmable Delay and Shut-Off (ES31C Models)
-Auto Focus with Manual Override
-Auto Iris with Manual Override
-Programmable Settings
-AC Line Lock
-NTSC/PAL

FEATURES

-Day/Night Automatic or Manual Operation
-Dual Threshold Setting (Dusk/Dark)
-1/3-Inch Format CCD Imager

-Digital Signal Processing
-Resolution of 540 TV Lines (Color Mode); 570 TV Lines (B-W)
-0.7 Lux (Color Mode) / 0.09 Lux (B-W Mode) Sensitivity
-UTP Output Standard
-Setup Service Connector
-C/CS Lens Mount
-Autosensing DC/Video Auto Iris Drive
-Electronic Shutter Control (ESC)
-Automatic Gain Control (AGC)
-Phase Adjustable Line Lock
-Backlight Compensation
-Internal Top/Bottom Mount
-Low Voltage and High Voltage Models
-Optional Integral Feedthrough Mount
-This camera switches between color and black/white mode as environmental lighting conditions dictate. This switching is performed automatically through a removable infrared (IR) cut filter. The CC3770UH has a sensitivity of 0.7 lux in color mode and 0.09 lux in black and white mode.The CC3770UH digital camera is quick and easy to install. The camera has a quick connect power connection, UTP output (through an RJ45-10 connector), BNC video connector, service connector (handy for attaching a local video test monitor during camera setup), and internal mount for either top or bottom mounting.
-The camera features broad spectrum automatic white balance, automatic gain control, electronic shutter control, digital signal processing, automatic backlight compensation, flickerless mode, and line lock with phase adjust. To adjust one of the camera’s fine-tuning features, just use the corresponding DIP switch on the back panel of the camera.
-The CC3770UH digital camera also includes a 1/3-inch imager, accepts (and autosenses) DC and video drive auto iris lenses, and has adjustable back focus to accommodate C or CS lenses. Back focus adjustment is easy with the lockable thumb wheel, accessible from the top or bottom of the camera. This camera is available in both high voltage and low voltage models.
-Optional accessories include the PCM150, a Pelco camera mount designed specifically for the CC3770UH
-This adjustable, welldesigned mount has no exposed cabling or hardware. All cable is integrated in the unit, making installation quick and easy. The PCM150 can be installed directly to a wall or ceiling or adapted to most standard electrical boxes worldwide.

(LENS NOT SUPPLIED WITH CAMERA)

SPECIFICATION