Camera video de supraveghere D/N HR PELCO

CAMERA D/N HR PELCO: Click to ZOOM

FEATURES

-Day/Night Automatic or Manual Operation
-Dual Threshold Setting (Dusk/Dark)
-1/3-Inch Format CCD Imager

Supraveghere video profesionala cu echipamente MacDouglas
-Digital Signal Processing
-Resolution of 540 TV Lines (Color Mode); 570 TV Lines (B-W)
-0.7 Lux (Color Mode) / 0.09 Lux (B-W Mode) Sensitivity
-UTP Output Standard
-Setup Service Connector
-C/CS Lens Mount
-Autosensing DC/Video Auto Iris Drive
-Electronic Shutter Control (ESC)
-Automatic Gain Control (AGC)
-Phase Adjustable Line Lock
-Backlight Compensation
-Internal Top/Bottom Mount
-Low Voltage and High Voltage Models
-Optional Integral Feedthrough Mount
-This camera switches between color and black/white mode as environmental lighting conditions dictate. This switching is performed automatically through a removable infrared (IR) cut filter. The CC3770UH has a sensitivity of 0.7 lux in color mode and 0.09 lux in black and white mode.The CC3770UH digital camera is quick and easy to install. The camera has a quick connect power connection, UTP output (through an RJ45-10 connector), BNC video connector, service connector (handy for attaching a local video test monitor during camera setup), and internal mount for either top or bottom mounting.
-The camera features broad spectrum automatic white balance, automatic gain control, electronic shutter control, digital signal processing, automatic backlight compensation, flickerless mode, and line lock with phase adjust. To adjust one of the camera’s fine-tuning features, just use the corresponding DIP switch on the back panel of the camera.
-The CC3770UH digital camera also includes a 1/3-inch imager, accepts (and autosenses) DC and video drive auto iris lenses, and has adjustable back focus to accommodate C or CS lenses. Back focus adjustment is easy with the lockable thumb wheel, accessible from the top or bottom of the camera. This camera is available in both high voltage and low voltage models.
-Optional accessories include the PCM150, a Pelco camera mount designed specifically for the CC3770UH
-This adjustable, welldesigned mount has no exposed cabling or hardware. All cable is integrated in the unit, making installation quick and easy. The PCM150 can be installed directly to a wall or ceiling or adapted to most standard electrical boxes worldwide.

(LENS NOT SUPPLIED WITH CAMERA)

SPECIFICATION

MODEL

CC 3770UH-6X

CC 3770UH-7X

Imaging Device

1/3-inch interline transfer CCD

Picture Elements

PAL 752 (H) x 582 (V)

Sensing Area

6mm diagonal

Day/Night Operation

Day Infrared (IR) cut filter

Night BK-7 glass with same optical displacement as day filter

Scanning System

PAL 625 lines, 21 interlace

Synchronization System

AC line lock/internal

Horizontal Resolution

540 TV lines (color); 570 TV lines (B-W)

Iris Control

Selectable on/off

Electronic Shutter Range

PAL 1/50-1/100,000 second

Auto Iris Lens

Type DC/video drive (autosensing)

Minimum Illumination

0.7 lux, F:1.2, 40 IRE, AGC on, 75% reflectance (color mode) 0.09 lux, F:1.2, 40 IRE, AGC on, 75% reflectance (B-W mode)

Filter Switching Threshold

Dusk 0.7 lux Dark 0.3 lux

Signal To Noise Ratio

>50dB

Vertical Phase

Adjustable ±180°

Automatic Gain Control

On/off switchable

Electronic Shutter Control

On/off switchable

Backlight Compensation

On/off switchable

Flickerless Mode

On/off switchable

Internal Sync.

On/off switchable

Auto White Balance

On/off switchable

D/N Dusk Dark

On/off switchable

Signal Processing

Digital Signal Processing (DSP)

Video Output

1 Vpp, 75 ohms

Auto White Balance Range

2.500° to 9.500°K

Gamma Correction

0.45

Power Requirements

24~28 VAC ±10% or 12~36 VDC

110~240 VAC

Power Consumption

6 watts nominal (8 watts during filter switching)

Power Connector

2-pin terminal strip, RJ45-10 connector

Integral power cable

Video Connector

BNC or RJ45-10

Service Connector

2.5mm jack for optional ICS090-SC service/monitor cable (compatible with any standard monitor BNC connector)
UTP Connector RJ45-10

Lens Jack

4-pin connector (miniature square)

Input for Remote Day/Night Switching

RJ45-10 or 2-pin terminal strip

Lens Mount

C/CS mount (adjustable)

Camera Mount

1/4-inch UNC-20 screw, top or bottom of camera housing

Operating Temperature

-10° to +50°C

Storage Temperature

-10° to +70°C

Operating Humidity

20% to 80%, noncondensing

Storage Humidity

20% to 90%, noncondensing

Dimensions

12.8(L)x7.2(W)x6.7(H)cm

Weight (without lens)

0.4 kg approximate

Shipping Weight

0.9 kg approximate

Tags: , ,

Leave a Reply